Item 1
25° green tip, 3.0 orifice
Everyday pattern for 2.5 GPM around 3,000 PSI. Wide enough to avoid zebra stripes.
View Amazon listing (affiliate coming)
Placeholder — not a live checkout link.
Kit · concrete
Driveway & concrete kit
A 25° workhorse tip, a 15° for gum, a surface cleaner that will actually spin, and a degreaser that stays downstream of the pump.
2,800–3,200 PSI · 2.3–2.8 GPM gas washer
Item 2
15° yellow tip, 3.0 orifice
Spot tool for oil, gum, and expansion joints. Keep it moving — it will etch if you linger.
View Amazon listing (affiliate coming)
Placeholder — not a live checkout link.
Item 3
40° white tip, 3.0 orifice
Rinse and soap pass. Softer on edges, lawn, and anything near paint.
View Amazon listing (affiliate coming)
Placeholder — not a live checkout link.
Item 4
15–16″ surface cleaner (3,000+ PSI / 2.3+ GPM)
Two spinning nozzles, no wand tiger stripes. Undersize the flow and the deck will not spin.
View Amazon listing (affiliate coming)
Placeholder — not a live checkout link.
Item 5
Concrete / driveway degreaser
Apply with a pump sprayer or foam cannon. Never pull harsh solvent or bleach through the pump.
View Amazon listing (affiliate coming)
Placeholder — not a live checkout link.
Item 6
1/4″ QC coupler + plug set
Swap tips without a wrench. Stainless lasts; brass is fine if you oil the O-rings.
View Amazon listing (affiliate coming)
Placeholder — not a live checkout link.
How to run the kit
- Confirm orifice on the tip chart. This list assumes ~3.0.
- Sweep loose grit. Degreaser on oil spots — pump sprayer or foam cannon, not the inlet.
- Surface cleaner, overlapping passes, skirt flat. Edges and joints get the 25° wand.
- 15° only on gum, tire marks, and stubborn pads. Keep it moving.
- 40° rinse toward the street. Stay off the garage door seals.
Turbo nozzles will etch broom-finished concrete if you stall. They are not in this kit on purpose.
Wrong deck size? Read the surface cleaner matrix. Wrong thread on the gun? See quick-connect wands.